There’s been a little bit of lonestar making in my studio. I guess cabin fever got the best of me…so much snow! Thought I’d share how I worked on my points. First I stuck a pin 1/4″ from the edge along the seam of the first piece and into the second piece. This one is also 1/4″ from the edge. You can draw the 1/4″ seam; I eyeballed it. As you can see, you need the points to align 1/4″ in, not at the edge.
Next, I gave the pin a good wiggle. This is a very technical sewing term, “a good wiggle.” This way, you can see where the pin was. Remove the pin. Place a second pin in as you normally would. As you stitch, stitch though the pin hole.